In the sub you also get a collection guide see pic reading this in mentions other vehicles
kenworth tanker ltk bmw r1200cc bike tnd db5 cr honda crf250r bike & sunseeker superhawk sp
& a picture of a boat from lald.i bet non of then are in the collection ??
also part 2 is the bmw 750il tnd.
I dont think bond in motion will be for sale in the shops as there is no price or barcode
on the magazine .
In Issue one the contents saids page 16 (back page) the next issue is the bmw750il from tnd
but the page has the db10 sp which is this issue???
I dont think bond in motion will be for sale in the shops as there is no price or barcode
on the magazine .
In Issue one the contents saids page 16 (back page) the next issue is the bmw750il from tnd
but the page has the db10 sp which is this issue???
I've just called Eaglemoss and they don't have a release date for the shops. Currently it seems to be sub only at the moment. So I may take out the special offer sub then cancel. I can at least use the two 'freebies' for a couple of more Code 3s!
First time poster so excuse any **** ups.
I have just received my issue #1 of the Bond In Motion collection,
The DB10 from Spectre.
So I will be keeping an eye on this forum to see what else is getting released that is different from the old Bond Car Collection seeing as like many others I have the original lot.
Also just thought I would submit an image of a custom job I did a few years back.
I should have spent a bit more time on the backdrop but it looks ok when sat between all the others.
It looks stunning, Quagmire. Perhaps you should move the wheels to the other direction and change the back drop to the movie's beach.
Welcome to the forum.
Introduce yourself in the Comings/Goings section of the Off-Topic chat.
I'm certainly looking forward to your future posts.
Hi DDennis , sorry , but correct colour is "light" blue
Here's a photo that I took of the actual Fiat 500's used in SPECTRE that I took when walking through the park adjacent to Pinewood during the filming of said film:
Also saw some of the Land Rover's and the plane used in Austria, and the Alfa Romeo's that the DB10 smashes through. I can share the other photo's if anyone would be interested in seeing them, even though it's a bit off topic for this thread.
Please do! I'd like to compare my Alfa code 3 with the real thing!
Sorry for the delay in responding to this - but slightly later than advertised here's my photo's of the Spectre vehicles at Pinewood:
Received my DB 10 from the Bond in Motion collection yesterday (along with the DB5 and Hornet - two more Code 3s I suppose!)
Today I called Eaglemoss to cancel the subscription (I only wanted the DB10) and interestingly the woman at the end of the phone told me to keep an eye on the Eaglemoss website as there may be models coming out that weren't in the original JB Car Collection! The way she put it made it sound as though there were people like me who bought the original collection and would be interested in expanding this as and when new models came out. It would make sense as they've got Skyfall and Spectre to cover.
I think we will be very pleased in case of new models coming out from Eaglemoss!! Maybe a jag CX75 and a couple of defender from Skyfall and Spectre.... 8-) 8-)
I think we will be very pleased in case of new models coming out from Eaglemoss!! Maybe a jag CX75 and a couple of defender from Skyfall and Spectre.... 8-) 8-)
Received my DB 10 from the Bond in Motion collection yesterday (along with the DB5 and Hornet - two more Code 3s I suppose!)
Today I called Eaglemoss to cancel the subscription (I only wanted the DB10) and interestingly the woman at the end of the phone told me to keep an eye on the Eaglemoss website as there may be models coming out that weren't in the original JB Car Collection! The way she put it made it sound as though there were people like me who bought the original collection and would be interested in expanding this as and when new models came out. It would make sense as they've got Skyfall and Spectre to cover.
Food for thought.
That sounds interesting.... and I just had a look on their website and saw that they're doing a 3 for 1 Promotion if anyone's tempted:
Received my DB 10 from the Bond in Motion collection yesterday (along with the DB5 and Hornet - two more Code 3s I suppose!)
Today I called Eaglemoss to cancel the subscription (I only wanted the DB10) and interestingly the woman at the end of the phone told me to keep an eye on the Eaglemoss website as there may be models coming out that weren't in the original JB Car Collection! The way she put it made it sound as though there were people like me who bought the original collection and would be interested in expanding this as and when new models came out. It would make sense as they've got Skyfall and Spectre to cover.
Food for thought.
That sounds interesting.... and I just had a look on their website and saw that they're doing a 3 for 1 Promotion if anyone's tempted:
Yes that's the one I took. I can use the extra cases for future code 3s.
Hi to all guys! Today i would like to share my new jbcc model... i looked for it for a lot of time... the 1:43 BMW R1200C from TND... i think it is lovely... especially near to the beautiful range...
Hello everyone, congratulations to the forum participants from whom I learned so much.
I am an italian collector of 1/43 models.
As well as fans of 007 I'm a fan of the Aston Martin, especially roadsters or DHC.
The film "The Living Daylights" stimulated me for many reasons.
First of all I wanted to change the model of the V8 Volante to correct the mistakes in the back.
This is the result:
I saw also the beautiful dioramas made by some of you and I wanted to do one too.
I tried to reproduce the moment when the car has been winterised in Q - Branch!
This is the result:
Thank you for your compliments.
Hi JB88!
It's strange to address you in English, but maybe someone else is interested in the processing I've done.
To correct the JBCC model error I used a very simple method.
However, it requires considerable cutting precision and very thin drills
I simply made two longitudinal cuts on the tail. I reduced the thickness of the metal in the inside just behind the tail transversely. Finally, very carefully, I folded the "back hood" to flatten the line.
Finally I finished the cutting edges with small touches of paint.
The cuts were made diagonally so that the edges were very close together
Actually I had bought the coupe (# 14 of the collection) to make this model.
After a long time (n.69) came out the V8 Volante in the JBCC! So it was much easier to to get a good model of the car, because there was no need to remove all the war gadgets...
But, having already started the transformation, I had the idea of doing the diorama of winterization...
Now I am working on another V8 Volante JBCC to get the V8 Convertible by Paul Banham
I hope that i post here in the correct place. Barbel said for me to move what I wrote in another part of ajb
I saw on the second hand market some James Bond cars. They were all the cars from James Bond films I think to the last Pierce Brosnan film. They were Corgi make and all each in the box but they were not new. They were £5 each.
If people think this is a good price to pay then when i go to the market and the man has still got these models to sell then I think I would buy the goldfinger astin martin and the omhss car also and perhaps the spy who loved me lotus.
I hope that i post here in the correct place. Barbel said for me to move what I wrote in another part of ajb
I saw on the second hand market some James Bond cars. They were all the cars from James Bond films I think to the last Pierce Brosnan film. They were Corgi make and all each in the box but they were not new. They were £5 each.
If people think this is a good price to pay then when i go to the market and the man has still got these models to sell then I think I would buy the goldfinger astin martin and the omhss car also and perhaps the spy who loved me lotus.
Hello Joshua
If they are Corgi I assume they are the 1/36 scale models.
As new they can normally go for £10-15 plus so I'd say 5 quid is a pretty good price for second hand if the box is in good condition.
Does somebody have a copy of GOLDENEYE by john gardner audio book unabridged on
cassette read by john kenneth about 6 hours long for sale or can make a copy for me ??
Comments
Hello pjfthompson & SWJ (hello!),
Do you mean this DB5 ?
Well done SWJ, another Code 3!!
Cheers.
kenworth tanker ltk bmw r1200cc bike tnd db5 cr honda crf250r bike & sunseeker superhawk sp
& a picture of a boat from lald.i bet non of then are in the collection ??
also part 2 is the bmw 750il tnd.
on the magazine .
In Issue one the contents saids page 16 (back page) the next issue is the bmw750il from tnd
but the page has the db10 sp which is this issue???
I've just called Eaglemoss and they don't have a release date for the shops. Currently it seems to be sub only at the moment. So I may take out the special offer sub then cancel. I can at least use the two 'freebies' for a couple of more Code 3s!
I have just received my issue #1 of the Bond In Motion collection,
The DB10 from Spectre.
So I will be keeping an eye on this forum to see what else is getting released that is different from the old Bond Car Collection seeing as like many others I have the original lot.
Also just thought I would submit an image of a custom job I did a few years back.
I should have spent a bit more time on the backdrop but it looks ok when sat between all the others.
Welcome to the forum.
Introduce yourself in the Comings/Goings section of the Off-Topic chat.
I'm certainly looking forward to your future posts.
It's a nice code 3 ! It's great to see new comers and new ideas !!
Some 'old' mag. & code3 ...
Cheers.
here is the new mag 205 of my code3 models.
Any news of the new UK collection (some pictures of models & mags ? )
Cheers.
Sorry for the delay in responding to this - but slightly later than advertised here's my photo's of the Spectre vehicles at Pinewood:
March 2015 - when they were still filming Spectre.
Great stuff - thank you for posting.
Today I called Eaglemoss to cancel the subscription (I only wanted the DB10) and interestingly the woman at the end of the phone told me to keep an eye on the Eaglemoss website as there may be models coming out that weren't in the original JB Car Collection! The way she put it made it sound as though there were people like me who bought the original collection and would be interested in expanding this as and when new models came out. It would make sense as they've got Skyfall and Spectre to cover.
Food for thought.
What do you think about DB10 model?
What do you think about DB10 model?
That sounds interesting.... and I just had a look on their website and saw that they're doing a 3 for 1 Promotion if anyone's tempted:
Yes that's the one I took. I can use the extra cases for future code 3s.
(I dare say the DB5 will turn up in Bond 25 ) )
I'm assuming so. The woman I spoke to told me to keep an eye on the Eaglemoss website in the future for any models not in the original collection
I am an italian collector of 1/43 models.
As well as fans of 007 I'm a fan of the Aston Martin, especially roadsters or DHC.
The film "The Living Daylights" stimulated me for many reasons.
First of all I wanted to change the model of the V8 Volante to correct the mistakes in the back.
This is the result:
I saw also the beautiful dioramas made by some of you and I wanted to do one too.
I tried to reproduce the moment when the car has been winterised in Q - Branch!
This is the result:
I am very interested in the process, could you briefly explain How did you do?
Thx!
Very good job and welcome !! Very good stuff and new ideas for the future...
here is one of my last models & mag I have done...
Any news on the current English or italian 'new' collection ?
Cheers.
Hi JB88!
It's strange to address you in English, but maybe someone else is interested in the processing I've done.
To correct the JBCC model error I used a very simple method.
However, it requires considerable cutting precision and very thin drills
I simply made two longitudinal cuts on the tail. I reduced the thickness of the metal in the inside just behind the tail transversely. Finally, very carefully, I folded the "back hood" to flatten the line.
Finally I finished the cutting edges with small touches of paint.
The cuts were made diagonally so that the edges were very close together
Actually I had bought the coupe (# 14 of the collection) to make this model.
After a long time (n.69) came out the V8 Volante in the JBCC! So it was much easier to to get a good model of the car, because there was no need to remove all the war gadgets...
But, having already started the transformation, I had the idea of doing the diorama of winterization...
Now I am working on another V8 Volante JBCC to get the V8 Convertible by Paul Banham
I saw on the second hand market some James Bond cars. They were all the cars from James Bond films I think to the last Pierce Brosnan film. They were Corgi make and all each in the box but they were not new. They were £5 each.
If people think this is a good price to pay then when i go to the market and the man has still got these models to sell then I think I would buy the goldfinger astin martin and the omhss car also and perhaps the spy who loved me lotus.
Hello Joshua
If they are Corgi I assume they are the 1/36 scale models.
As new they can normally go for £10-15 plus so I'd say 5 quid is a pretty good price for second hand if the box is in good condition.
cassette read by john kenneth about 6 hours long for sale or can make a copy for me ??