James Bond Car Collection - Questions and praise

1235236238240241248

Comments

  • FACTFACT Station ZPosts: 320MI6 Agent
    There's no reason why the Bond in Motion partwork shouldn't go ahead, Fabbri and Eaglemoss have commissioned models from all 50 movies between them .......
    I think you just doubled EON's total output there, MCF :)

    Yes, I also wouldn't be surprised to see the partwork relaunched after this time. Eaglemoss (and their few remaining competitors) have shown that they will flog whatever mileage they can get from any of the castings available to them, so why not with these ones? I wonder whether there will be a mix of IXO and UH again, though - it appears to be UH only so far.

    One also wonders just how much stock IS left over from the earlier runs? The JBCC partwork ran in several countries and was launched in Czech Republic right towards the end of its UK run (IIRC). So they were doing what they could back then to move the stock. Also consider that Eaglemoss's online shop has been out of stock of many of the back issues for a long time already.

    Remember when the Ford Anglia was issued with the wrong film on the base? I remember thinking at the time how it had obviously been easier for them to order up a whole new batch of models & bases rather than just sending out replacement bases. Which makes me wonder if it's not just the plastic outer blister that is new for these Bond In Motion models, but also the whole model inside that blister. Those gold-coloured Subscribers Specials would have to be new productions, not some old models that got shipped back to China for a new paint job ;)

    And as for those magazines, what's to stop them just re-using the content from the JBCC magazines, it's not like there's been any new material discovered in the past 8 years for the background stories of Goldfinger and all those other early movies!
  • Thunderbird 2Thunderbird 2 East of Cardiff, Wales.Posts: 2,785MI6 Agent
    FACT wrote:
    And as for those magazines, what's to stop them just re-using the content from the JBCC magazines, it's not like there's been any new material discovered in the past 8 years for the background stories of Goldfinger and all those other early movies!

    Now here's an idea! Has anyone secured the No 1 from the Bond In Motion test run, and compared the magazine content to No 20 from the JBCC? That would answer that question! :)
    This is Thunderbird 2, how can I be of assistance?
  • MovieCarFanMovieCarFan Posts: 973MI6 Agent
    edited November 2015
    FACT wrote:
    There's no reason why the Bond in Motion partwork shouldn't go ahead, Fabbri and Eaglemoss have commissioned models from all 50 movies between them .......
    I think you just doubled EON's total output there, MCF :)

    Oops!!! - it really isn't a good idea to post in a hurry without re-reading, is it? ;% I meant to put '50 years of movies' - in other words Eaglemoss obviously have all of the 50 years worth of Bond movies well covered with models, apart from Skyfall.


    FACT wrote:
    Yes, I also wouldn't be surprised to see the partwork relaunched after this time. Eaglemoss (and their few remaining competitors) have shown that they will flog whatever mileage they can get from any of the castings available to them, so why not with these ones? I wonder whether there will be a mix of IXO and UH again, though - it appears to be UH only so far.

    Interesting point. I presume they could cover all of the Bond movies using UH models alone, couldn't they?
    FACT wrote:
    One also wonders just how much stock IS left over from the earlier runs? The JBCC partwork ran in several countries and was launched in Czech Republic right towards the end of its UK run (IIRC). So they were doing what they could back then to move the stock. Also consider that Eaglemoss's online shop has been out of stock of many of the back issues for a long time already.

    Remember when the Ford Anglia was issued with the wrong film on the base? I remember thinking at the time how it had obviously been easier for them to order up a whole new batch of models & bases rather than just sending out replacement bases. Which makes me wonder if it's not just the plastic outer blister that is new for these Bond In Motion models, but also the whole model inside that blister. Those gold-coloured Subscribers Specials would have to be new productions, not some old models that got shipped back to China for a new paint job ;)

    Maybe they might have been in some way obligated by consumer regulations to replace the entire Anglia model, including sealed blister packaging, rather than just the base?
    Re the Bond in Motion releases it's possible they could supplement existing unsold stock with identical new models or just re-stock with identical models, it would avoid any major new licence issues if it's effectively just another 'production run' being commissioned.
    FACT wrote:
    And as for those magazines, what's to stop them just re-using the content from the JBCC magazines, it's not like there's been any new material discovered in the past 8 years for the background stories of Goldfinger and all those other early movies!

    I would bet they will probably use the same illustrations, photos and text (where the existing licencing deal permits) and just re-arrange them a bit.
  • Diecast007Diecast007 Posts: 576MI6 Agent
    Ok ive taken the bull by the horns and signed up :s .
    The collection promises a number of exclusives including DB10 and specials that will be offered at a higher price during the collection.
    So will keep you posted. help what have I done but what the heck. Lets see what happens
  • Diecast007Diecast007 Posts: 576MI6 Agent
    on another note here is a project ive been working on over the summer not bond but hope you like.
    11836692_10153057334412215_3321658622030869584_n.jpg

    11855616_10153057335137215_3753692333849095715_n.jpg

    11855830_10153057333257215_3981643640435299204_n.jpg

    11870773_10153057336017215_2665605568412240691_n.jpg

    11880353_10153057333477215_3023075799231960864_n.jpg

    11899959_10153057335372215_4392047341335292206_n.jpg

    This is code 3 TAMIYA 1/10 JEEP WRANGLER 'ROCK CRAWLER', it took me three months restoring a standard kit upgrading motor, suspension , steering, full working lights and electric winch. Graphics were made for me as were reg plates and in car ID badge. I had to source the interior from the US . The car is a nod to Jurassic Park with certain artistic license including paint scheme and Jeep spec. I think it looks ok. I know not James Bond but thought some of you may be interested . I have another project to replicate 1/10 CHEVY blazer from BOND .
  • Diecast007Diecast007 Posts: 576MI6 Agent
    photo_1.jpg

    photo_2.jpg

    photo_3.jpg

    photo_4.jpg

    photo_5.jpg

    Good to see the code 3 Jag JB88 here is mine I made back in early 2014
  • Rainier WolfcastleRainier Wolfcastle Posts: 484MI6 Agent
    For those of you wondering if the magazine content is the same as before - issue 1 is completely shown on the website.
    I just don't have my copy of the JBCC DBS magazine at hand.


    1.jpg

    2.jpg

    3.jpg

    4.jpg

    5.jpg

    6.jpg

    7.jpg

    8.jpg

    9.jpg
  • rhinomanrhinoman Lancashire, UKPosts: 67MI6 Agent
    edited November 2015
    Hi guys! This is rather exciting, isn't it!
    I just checked my JBCC magazine issue 20 and the DBS car review pages (4 &5) are exactly the same content & photo, just changed font and styling. The record-breaking DBS stunt roll pages are similar too - but all the other content is different ... Without trawling through every JBCC issue, though, I can't say the rest isn't a rehash compiled from other previous issue content.
    Interestingly, they do mention boats and planes on the website, so it's not just a car collection, it's 'Bond In Motion'. Maybe trucks and buses will finally feature?
    Very tempted to subscribe but expect the majority of models will be re-releases from JBCC. Though Skyfall and Spectre vehicles should feature now ... The FAQs page states that the "collection is only available in the UK at the moment".
    Lastly, the website shown on the mag photos inside front cover isn't live yet, i.e. www.007die-cast.com.
    Best wishes, Rhinoman B-)
  • rhinomanrhinoman Lancashire, UKPosts: 67MI6 Agent
    Should mention also, some of the free gifts if you do subscribe, via http://007car-collection.com/ :

    sub_gift_1.jpg sub_gift_2.jpg sub_gift_3.jpg

    The special DB5 and RR Phantom models are described as "gold-painted"! Looks more like banana yellow to me haha.

    Cheers,
    Rhinoman B-)
  • Diecast007Diecast007 Posts: 576MI6 Agent
    edited November 2015
    rhinoman wrote:
    Hi guys! This is rather exciting, isn't it!
    I just checked my JBCC magazine issue 20 and the DBS car review pages (4 &5) are exactly the same content & photo, just changed font and styling. The record-breaking DBS stunt roll pages are similar too - but all the other content is different ... Without trawling through every JBCC issue, though, I can't say the rest isn't a rehash compiled from other previous issue content.
    Interestingly, they do mention boats and planes on the website, so it's not just a car collection, it's 'Bond In Motion'. Maybe trucks and buses will finally feature?
    Very tempted to subscribe but expect the majority of models will be re-releases from JBCC. Though Skyfall and Spectre vehicles should feature now ... The FAQs page states that the "collection is only available in the UK at the moment".
    Lastly, the website shown on the mag photos inside front cover isn't live yet, i.e. www.007die-cast.com.
    Best wishes, Rhinoman B-)

    Yep website is live , I took the plunge and subscribed had a confirmation and receipt (website is www.007car-collection.com)

    Just got an email first delivery in 21 days !
  • MovieCarFanMovieCarFan Posts: 973MI6 Agent
    rhinoman wrote:
    Should mention also, some of the free gifts if you do subscribe, via http://007car-collection.com/ :

    sub_gift_1.jpg sub_gift_2.jpg sub_gift_3.jpg

    The special DB5 and RR Phantom models are described as "gold-painted"! Looks more like banana yellow to me haha.

    Cheers,
    Rhinoman B-)

    Welcome back Rhino man! {[]

    I realise the special DB5 and Rolls Royce models are probably only pre-production mock-ups but they do look strange, a bit like they've been through a caramel car wash apart from the lights, tyres and licence plates.

    I did actually suggest many moons ago that Fabbri/Eaglemoss could have created a Goldfinger RR with partial gold being shown, as per the gold smuggling concept in the movie, but covering the entire thing in gold paint including the roof is going a bit far methinks.

    I think they'd both look better presented like the Corgi gold DB5, with chromed parts being left in chrome.
  • ArronaxArronax Florida, USAPosts: 45MI6 Agent
    edited November 2015
    Always trying something different, this is my next Bond project . . .

    Airfix_BN_Islander_kit_-_small_file.jpg

    OK, the box is a little dented, the plastic colour is terrible but the parts seem to be all there. Yes, it will be built with wings.

    And it was only $15.00!
  • MovieCarFanMovieCarFan Posts: 973MI6 Agent
    That is a VERY bright yellow, it's going to need another $15.00 spent on multiple coats of black paint! Can't wait to see the finished project.....
  • DDenisDDenis Posts: 166MI6 Agent
    Hi to all,
    Nice to see a new collection in UK and some activities !! For the moment, no 'new' models than previous collections. Just wait !!
    Good to see new code 3 coming (good idea Arronax !)
    Some work done for my code 3 & 4 (movie series).
    Cheers.



    11_Inside_part_code_4_12.jpg

    12_CODE4_Mazda_Rx8_01.jpg

    12_Inside_part_code_4_13.jpg

    13_CODE4_Ferrari_308_GTS_01.jpg
  • DDenisDDenis Posts: 166MI6 Agent
    hello to all,
    Just 1 (not enough) code 3... waiting for the new collection & the new code 3. :))
    Based on an idea from SWJ for month ago....
    Cheers.

    183_Inside_part_184_DD_00.jpg

    184_CODE_3_DD_SOLO_PEUGEOT_404_01.jpg
  • SWJSWJ Posts: 100MI6 Agent
    DDenis wrote:
    hello to all,
    Just 1 (not enough) code 3... waiting for the new collection & the new code 3. :))
    Based on an idea from SWJ for month ago....
    Cheers.

    183_Inside_part_184_DD_00.jpg

    184_CODE_3_DD_SOLO_PEUGEOT_404_01.jpg

    Great stuff - thanks DDenis
  • Diecast007Diecast007 Posts: 576MI6 Agent
    rhinoman wrote:
    Should mention also, some of the free gifts if you do subscribe, via http://007car-collection.com/ :

    sub_gift_1.jpg sub_gift_2.jpg sub_gift_3.jpg

    The special DB5 and RR Phantom models are described as "gold-painted"! Looks more like banana yellow to me haha.

    Cheers,
    Rhinoman B-)

    Welcome back Rhino man! {[]

    I realise the special DB5 and Rolls Royce models are probably only pre-production mock-ups but they do look strange, a bit like they've been through a caramel car wash apart from the lights, tyres and licence plates.

    I did actually suggest many moons ago that Fabbri/Eaglemoss could have created a Goldfinger RR with partial gold being shown, as per the gold smuggling concept in the movie, but covering the entire thing in gold paint including the roof is going a bit far methinks.

    I think they'd both look better presented like the Corgi gold DB5, with chromed parts being left in chrome.

    As soon as my delivery arrives I will post pictures. Cant believe this thread is still going which is brilliant. I might just be inspired to rekindle my code 3's that never got finished. Good to see familiar names ! here's to more chat ahead with what could be potentially an exciting new collection albeit with some repeated models !
  • JagJag Posts: 1,167MI6 Agent
    That is a VERY bright yellow, it's going to need another $15.00 spent on multiple coats of black paint! Can't wait to see the finished project.....

    I would certainly spray with grey primer first - then two coats of black should do the job!
  • PoorMansJBPoorMansJB USAPosts: 1,203MI6 Agent
    Guys, I'm looking for a couple of the original magazines to finish out a collection:
    72, 116, 117, 124, and 125.

    If you have spares, please let me know!

    Also, I have a ton of extra cars, backgrounds, baseplates, etc. Let me know if you're looking for something.
  • DDenisDDenis Posts: 166MI6 Agent
    Hi to all,
    nice to see activity again here... let us know what is doing on with the new JB collection.

    For thus who like movie car in general.... some new mag realize few days ago.
    So next mag is 14.
    Cheers.

    13_Inside_part_code_4_14.jpg
  • DDenisDDenis Posts: 166MI6 Agent
    Code 4 - Mag 14 (French car & French movie (using Europe history with Belgium...) - very funny

    14_CODE4_Renault_4_01.jpg

    Next mag is a old movie that I saw when I was student in UK : not a great movie, but a nice car !
    14_Inside_part_code_4_15.jpg

    Cheers.
  • DDenisDDenis Posts: 166MI6 Agent
    Hi,
    So here is the Lotus !

    15_CODE4_Lotus_Esprit_01.jpg

    And the next one is a movie saw when I was young on TV, with a very good American car :
    15_Inside_part_code_4_16.jpg

    Hope you like it.
    Cheers.
  • DDenisDDenis Posts: 166MI6 Agent
    Hi,
    And here is the model !

    16_CODE4_Pontiac_Firebird_01.jpg

    Cheers.

    Some recap :

    14_nothing_to_declare.jpg

    15_Teen_agent.jpg

    16_Smokey_the_bandit.jpg
  • Teenage MTeenage M LondonPosts: 206MI6 Agent
    THERE IS A FINELY DETAILED 1:8 SCALE MODEL OF THE JAMES BOND 'GOLDFINGER' ASTON MARTIN DB5 FOR SALE AT BONHAMS AUCTIONS! :007)

    THE LINK TO THE PAGE IS BELOW:
    http://www.bonhams.com/auctions/22705/lot/111/
    James Bond: That’s a Smith & Wesson, and you’ve had your six.

    http://www.james-bondco.yolasite.com/
  • JagJag Posts: 1,167MI6 Agent
    Teenage M wrote:
    THERE IS A FINELY DETAILED 1:8 SCALE MODEL OF THE JAMES BOND 'GOLDFINGER' ASTON MARTIN DB5 FOR SALE AT BONHAMS AUCTIONS! :007)

    THE LINK TO THE PAGE IS BELOW:
    http://www.bonhams.com/auctions/22705/lot/111/


    I have one of those... except mine is much more finely detailed!
  • Teenage MTeenage M LondonPosts: 206MI6 Agent
    Jag wrote:
    Teenage M wrote:
    THERE IS A FINELY DETAILED 1:8 SCALE MODEL OF THE JAMES BOND 'GOLDFINGER' ASTON MARTIN DB5 FOR SALE AT BONHAMS AUCTIONS! :007)

    THE LINK TO THE PAGE IS BELOW:
    http://www.bonhams.com/auctions/22705/lot/111/


    I have one of those... except mine is much more finely detailed!

    They are very cool! :007)
    James Bond: That’s a Smith & Wesson, and you’ve had your six.

    http://www.james-bondco.yolasite.com/
  • DDenisDDenis Posts: 166MI6 Agent
    Hi to all,
    A new code 3 James Bond, coming from an 'old' idea from SWJ...p256 .... :))
    Hope to see new models in the new 'official' collection (any news ?...?)

    184_Inside_part_185_DD_00.jpg

    185_CODE_3_DD_ROLE_OF_HONOR_LANCIA_STRATOS_0.jpg

    IMG_2947.jpg
    Cheers
  • herbie123herbie123 Posts: 47MI6 Agent
    Has anybody received their copy through the post yet. I subsrcriped over three weeks ago and still haven't received mine yet.
    Diecast007 wrote:
    rhinoman wrote:
    Should mention also, some of the free gifts if you do subscribe, via http://007car-collection.com/ :

    sub_gift_1.jpg sub_gift_2.jpg sub_gift_3.jpg

    The special DB5 and RR Phantom models are described as "gold-painted"! Looks more like banana yellow to me haha.

    Cheers,
    Rhinoman B-)

    Welcome back Rhino man! {[]

    I realise the special DB5 and Rolls Royce models are probably only pre-production mock-ups but they do look strange, a bit like they've been through a caramel car wash apart from the lights, tyres and licence plates.

    I did actually suggest many moons ago that Fabbri/Eaglemoss could have created a Goldfinger RR with partial gold being shown, as per the gold smuggling concept in the movie, but covering the entire thing in gold paint including the roof is going a bit far methinks.

    I think they'd both look better presented like the Corgi gold DB5, with chromed parts being left in chrome.

    As soon as my delivery arrives I will post pictures. Cant believe this thread is still going which is brilliant. I might just be inspired to rekindle my code 3's that never got finished. Good to see familiar names ! here's to more chat ahead with what could be potentially an exciting new collection albeit with some repeated models !
  • FACTFACT Station ZPosts: 320MI6 Agent
    Just stepping away from the JBCC/BIM theme for a bit, I see that Corgi is now planning a Thunderball 50th Anniversary edition of the 1/43 Aston Martin DB5 casting that has seen such mileage in 2015.

    ICYMI, the Goldfinger 50th Anniversary version was released as CC04203 towards the end of January 2015 and then re-issued without the anniversary stickers as CC04204 & then again as CC04205 (although the differences between the last two are not at all obvious) ... all with silver and gold versions, in the ratio of 5:1.

    The packaging for the proposed new release, CC04206, is largely the same as the previous three but differs in terms of colours, dropping the yellow & using silver in its place & swapping the blue for a darker blue. Unfortunately my Postimage account has disappeared since I last used it here so I can't share.
    It will apparently also be made as 5 silvers to 1 gold.

    Not sure what market Corgi is chasing with all of these DB5 re-issues ... and unless they are getting this model to market in January they run the risk of missing the Thunderball anniversary boat anyway (released December 1965).
  • Rainier WolfcastleRainier Wolfcastle Posts: 484MI6 Agent
    Thanks for the info, FACT - although there were no gold 04205, only silver.


    This gold 04206 was just listed on ebay:

    $_57.JPG
    $_57.JPG
    $_57.JPG
    $_57.JPG
    $_57.JPG
Sign In or Register to comment.